Use with your ROI-XMA or ROI-USB-Thermistor easy to
connect Thermistors.
The ROI-N10K 10K ohm NTC thermistor series allows
connection to your USB thermistor measurement system with a simple screw
driver. The connection lead can be extended in the field as needed using 2
wire copper cable and many standard electrical connectors. No need for
special alloy extension cables or hard to get multi wire cables.
The thermistor is a simple to connect device,
without the need to worry about misconnection. Unlike other polarity
sensitive sensors, like the thermocouple or the RTD, the thermistor may be
connected with either lead attached to either input screw.
|
Applications |
|
|
Air sensor for air conditioning
(not for use in evaporator) |
|
|
Features |
|
|
Thermistor with epoxy resin
encapsulation |
|
|
PVC-insulated wires (black) |
|
|
with tinned ends, AWG 26 |
|
|
Specifications |
|
|
Tmax = 105 °C |
|
|
Resistance tolerance delta RN/RN |
± 3 % |
|
Rated temperature TN |
25 °C |
|
B value tolerance delta B/B |
± 0.5 % |
|
Thermal cooling time constant (in
air) 0c |
approx. 20 s |
|
B25/100 |
3988 k |
|
R25 |
10 k ohm |
| T to R
relationship |
NTC |
|
Note |
|
|
Only to use in dry environmental
conditions. |
|
|
Climatic category (IEC 60068-1) |
30/100/56 |
