MADE IN THE USA!

Home

Products Services Applications Literature News Enter Shopping Center
Links

 

ROI-XMA LOOP POWERED THERMISTOR TRANSMITTER

$210.00 ROI-XMA SERIES 400 2252 OHM LOOP POWERED THERMISTOR TRANSMITTER

 

 

ROI-2252XMA32115F $210.00 

(excluding tax & shipping) 

400 Series 2252 Ohm NTC Thermistor to 4-20mA loop powered transmitter 32 to 115 F

The ROI-XMA series is a versatile family of loop powered 4-20mA thermistor transmitters. Versions can be provided for thermistor base resistances ( 25 Deg C ), between 1K and 20Kohm impedance. Thermistor transmitter signal range can be custom scaled to alternate thermistor temperature spans within thermistor temperature sensor range. Thermistor transmitter supply voltage may be from 7.5 to 36Vdc. Output circuit is reverse connection protected and filtered.

  • PLUGGABLE EURO ELECTRICAL CONNECTORS

  • SNAP ON MOUNTING BASE FOR DIN RAIL OR SURFACE MOUNTING

  • WIDE 4-20mA LOOP SUPPLY RANGE FROM 7.5-36V

  • USED IN REMOTE MONITORING

  • MEASURE INDUSTRY STANDARD 2252 OHM 400 SERIES NTC THERMISTORS

  • READ THERMISTOR WITH PLC, RTU, & PC A-D SYSTEMS

  • USE WITH 20mA, 5V, & 10V MEASUREMENT SYSTEMS *

Specifications:

MOUNTING: 35mm DIN rail or surface mountable snap on base

SUPPLY RANGE: 7.5 TO 36Vdc

SIGNAL OUTPUT: 4-20mA ( LOOP POWERED ) **

CONNECTIONS: 30-12awg wire

INPUT RESISTANCE:  25 Deg C base value 2,252 ohm 

MEASUREMENT RANGE: 32 to 115 F

INPUT TYPE: 400 SERIES 2252 OHM NTC 2 WIRE THERMISTORS

RESPONSE: < 10mS

DIMENSIONS: 4.510 X 1.258 X 3.948” (height above rail) LWH **

* Loop termination resistor required when used with voltage ADC

** 4-20mA signal uses a 2 wire connection. Thermistor transmitter output is connected in series, with supply and measurement device.

*** Mated connector adds additional 3/8” to height.

Use spare PLC 4-20mA inputs for temperature measurement, with the ROI-XMA thermistor transmitter. ROI-XMA thermistor transmitters allow the simple measurement of industry standard thermistors. Existing 2252 ohm NTC, 400 series, thermistors can be connected to modern control systems. The thermistor is a simple way to add temperature measurement to a PLC. The thermistor is ideally suited for limited temperature ranges can be used to achieve higher precision than other temperature sensors. Useful in HVAC systems, refrigeration systems, chillers, environmental monitoring, computer room monitoring, dryer, and other limited temperature range applications.

400 Series 2252 Ohm NTC Thermistor to 4-20mA 2 wire loop powered transmitter 32 to 115 F

 

About Us
Signal Conditioner   USB adapter
4 20ma transmitter Analog converter digital
 Instruments Data Acquisition
Galvanic Isolator Data Logger
Amplifier Systems
 Sensor Contact Us
RTD 10k thermistor Temperature Current Resistance 4-20mA Site Map

Robert Owen Inc.
PO Box 227
Albertson, NY 11507
Phone 516-815-3199 Fax 516-706-1705

©2009 Robert Owen Inc. All Rights Reserved.

Resistance | Sensor | Instruments | RTD | Thermistor | Amplifier | Signal Conditioner  | Current | 4-20mA Transmitter | Temperature Transmitter | Thermistor Transmitter | RTD Transmitter | Resistance Transmitter | Potentiometer Transmitter | mV Transmitter | Isolation Amplifier | Analog USB Adapter 0-20ma USB A-D | 4-20ma USB A-D | 0-5V USB A-D | 0-10V USB A-D | Thermistor USB A-D | Temperature USB A-D | USB Thermometer | Temperature Profile | Temperature Recorder | Data Acquisition | Products Made In The USA