| |
-200 - 500C 4-20mA PT1000 RTD temperature transmitter 210USD
ROI-1000RXMAN200500C $210.00
(excluding tax & shipping)
1000 Ohm PT1000 RTD -200 to 500 Deg C
4-20mA 2 wire loop powered transmitter
The ROI-XMA series is a versatile family of loop powered
4-20mA RTD transmitters. Versions can be provided for Platinum RTD resistances,
of 100 ohm and 1000 ohm impedance. Signal range can be custom scaled to
alternate RTD temperature spans within sensor range. 4-20mA transmitter supply
voltage may be from 7.5 to 36Vdc. Output circuit is reverse connection
protected and filtered.
-
PLUGGABLE EURO ELECTRICAL CONNECTORS
-
SNAP ON MOUNTING BASE FOR DIN RAIL OR SURFACE MOUNTING
-
WIDE 4-20mA LOOP SUPPLY RANGE FROM 7.5-36V
-
USED IN REMOTE MONITORING
-
MEASURE 1000 OHM INDUSTRY STANDARD RTDs
-
READ WITH PLC, RTU, & PC A-D SYSTEMS
-
USE WITH 20mA, 5V, & 10V MEASUREMENT SYSTEMS *
Specifications:
- MOUNTING: 35mm DIN rail or surface mountable snap on
base
- SUPPLY RANGE: 7.5 TO 36Vdc
- SIGNAL OUTPUT: 4-20mA ( LOOP POWERED )**
CONNECTIONS: 30-12awg wire
- INPUT RANGE: -200 to 500 Deg C
- INPUT TYPE: PT1000 2 WIRE RTD
- RESPONSE: < 10mS
- DIMENSIONS: 4.510 X 1.258 X 3.948 (height above
rail) LWH***
- * Loop termination resistor required when used
with voltage ADC
- ** 4-20mA signal uses a 2 wire connection.
Resistance transmitter output is connected in series, with supply and
measurement device.
- *** Mated connector adds additional 3/8” to height.
|
|
