Home

 

ROI-25XMA01KP $210.00 

(excluding tax & shipping) 

1K ohm Potentiometer Potentiometer 

4-20mA 2 wire loop powered transmitter

The ROI-XMA series is a versatile family of loop powered 4-20mA potentiometer transmitters. Versions can be provided for potentiometers with full resistance, between 1K and 10K ohms. Potentiometer transmitter signal range can be custom scaled to alternate resistance spans within potentiometer range. Potentiometer transmitter supply voltage may be from 7.5 to 36Vdc. Output circuit is reverse connection protected and filtered.

• PLUGGABLE EURO ELECTRICAL CONNECTORS

• SNAP ON MOUNTING BASE FOR DIN RAIL OR SURFACE MOUNTING

• WIDE 4-20mA LOOP SUPPLY RANGE FROM 7.5-36V

• USED IN REMOTE MONITORING

• MEASURE 1,000 (1K) to 10,000 (10K) OHM INDUSTRY STANDARD POTENTIOMETERS

• READ POTENTIOMETER WITH PLC, RTU, & PC A-D SYSTEMS

• USE WITH 20mA, 5V, & 10V MEASUREMENT SYSTEMS *

Specifications:

MOUNTING: 35mm DIN rail or surface mountable snap on base

SUPPLY RANGE: 7.5 TO 36Vdc

SIGNAL OUTPUT: 4-20mA ( LOOP POWERED )**

CONNECTIONS: 30-12awg wire

INPUT RESISTANCE RANGE:  1K ohm

INPUT TYPE: POTENTIOMETER

RESPONSE: < 10mS

DIMENSIONS: 4.510 X 1.258 X 3.948” (height above rail) LWH **

* Loop termination resistor required when used with voltage ADC

** 4-20mA signal uses a 2 wire connection. Potentiometer transmitter output is connected in series, with supply and measurement device.

*** Mated connector adds additional 3/8” to height.

Robert Owen Inc.
PO Box 227
Albertson, NY 11507
Phone 516-815-3199 Fax 516-706-1705

©2009 Robert Owen Inc. All Rights Reserved.