The ROI-ISOV10 is a simple to use isolated signal conditioner. Input and output sections powered by separate supplies, galvanic isolation accomplished via capacitive barrier.

• PLUGGABLE EURO ELECTRICAL CONNECTORS

• SNAP ON MOUNTING BASE FOR DIN RAIL OR SURFACE MOUNTING

• USED IN LOOP ISOLATION

• GROUND LOOP ELIMINATION

• SIGNAL ISOLATION

Specifications:

• Isolation level: 1.5Kv

method: 500KHz modulation passed over a dual (differential) 1pF barrier

• Input range: +/-10V

• Input Resistance: 200K ohm

• Output range: +/-10V

ripple: 20mVp-p 500KHz

• Gain: 1

error: +/- 0.05%FSR typical, +/-0.5%max

nonlinearity: +/-0.005%FSR typical. +/-0.01%max

• Frequency response: DC to 50KHz

• Supplies: Dual +/-4.5 to 18Vdc

5mA typ. 7mA max for input side

5.5mA typ. 7mA max for output side

• Connections: 2, input & output

negative-power/ground/signal/positive-power,

plug in top entry connectors,

screw clamp stripped wire connection

30-12awg wire

• Mounting: 35mm DIN Rail or Surface mountable snap on base,

allows side by side install of multiple units

• Dimensions: 4.510 X 1.258 X 3.948” (height above rail) lwh

Mated connector adds additional 3/8” to height

HOW TO ORDER

Downloadable cut sheet ROI-ISOV10.pdf

Robert Owen Inc.
PO Box 227
Albertson, NY 11507
Phone 516-629-5134 Fax 516-706-1705

©2011 Robert Owen Inc. All Rights Reserved.