|
Contact
Info |
ROI-XMA LOOP POWERED 4-20mA RESISTANCE TRANSMITTER
The ROI-XMA series is a versatile family of loop
powered 4-20mA resistance transmitters. Versions can be provided for
resistances, between 1K
ohm and 10K ohm impedance. Signal range
can be custom scaled to alternate spans within
sensor range. Transmitter supply voltage may be from 7.5 to 36Vdc.
Output circuit is reverse connection protected and filtered.
-
PLUGGABLE EURO ELECTRICAL CONNECTORS
-
SNAP ON MOUNTING BASE FOR DIN RAIL OR SURFACE MOUNTING
-
WIDE 4-20mA LOOP SUPPLY RANGE FROM 7.5-36V
-
USED IN REMOTE MONITORING
-
MEASURE 1K OHM TO 10KOHM INDUSTRY STANDARD
SENSORS
-
READ WITH PLC, RTU, & PC A-D SYSTEMS
-
USE WITH 20mA, 5V, & 10V MEASUREMENT SYSTEMS *
Specifications:
- MOUNTING: 35mm DIN rail or surface mountable snap on
base
- SUPPLY RANGE: 7.5 TO 36Vdc
- SIGNAL OUTPUT: 4-20mA ( LOOP POWERED )**
CONNECTIONS: 30-12awg wire
- INPUT RESISTANCE RANGE: 1K to 10K ohm
- INPUT TYPE: Resistance
- RESPONSE: < 10mS
- DIMENSIONS: 4.510 X 1.258 X 3.948”(height above
rail) LWH***
- * Loop termination resistor required when used
with voltage ADC
- ** 4-20mA signal uses a 2 wire connection.
Resistance transmitter output is connected in series, with supply and
measurement device.
- *** Mated connector adds additional 3/8” to height.
HOW TO ORDER
|
|
